High-quality granite countertop production process

    Production and processing of high-quality, customer satisfaction granite countertop products, in accordance with the production process as long as reasonable plan for implementation, tracking gatekeeper, normal production will be able to enter orbit.
    Technological process must first clear: elections expected → nesting → Feeding (Circle Saw) → sawing → bridge inspection → infrared cut → granite countertop processing workshops → bonding (Leech edge, ducks Qichen, Ping-) → processing plant on the edge of different types (Ap Qichen, Leech edge, etc.) → dug pots Hole shafts, bored → grinding → test → protective packaging → → shipments.
    Election materials, a marker: According to the agreement customers plate (sample), the board will deal with the raw material Stone control, and finally a small hand grinder with polished control and inspect the color, pattern, particle consistency. Links to the attention of election materials, if this is a problem, the processes behind all expected to be laid off. Stone Water Act and the use of visual inspection of its quality, must choose the same mining area, the same color, pattern, particle density consistent; From the appearance point of view, does not allow any cracks, biliary stone, the color line, So like flowers, and other impurities, and then by the number of production tasks to a reasonable single markers. China Stone Network - www. stone-buy. com-related Stone
    Sawing, Discharge: Stone sawing on the disk, according to the drawings, nesting requirements sawing processing, and then saw out the hair plate acceptance would remove unqualified goods, qualified goods to be placed into the next size metal frame that came on the Road processes; The thickness will be more than another standard size metal frame that came on the products, processes to be transferred under the Road for thick.
    Coarse grinding: Thick products and will be qualified products coarse grinding, coarse grinding dried, the surface brushing products processing, brushing products can fill the pore surface, tiny holes, Chicken paw  profiling, the result has been the surface beauty products, smooth, bright color, gloss improve.
    Polish: will be eligible for case-by-block polished, the product will have cracks, color, biliary stone, the sweep with flowers in red crayon to mark plate surface, under the procedures for timely detection, crack, biliary stone, stone color, So spend abandoned, Machine into small-compliant products, such as retaining plate; Middle goods gloss requirements in 90 ° above; good control of the formation of the products.
    Infrared Bridge Cutting Machine: goods will be qualified by a single production nesting cutting, product assurance of the geometric size, angle size, the accuracy of diagonal size; Collapsing allowed to exist side swap angle; In particular the need to back granite countertop bonding, in order to maintain the edge, edge, angle intact; Impermissible face plate of a yin and yang. Not a crack, Peutz, alkali, such as sweeping flowers.
    Granite countertop processing: Adhesive bonding will be the product with small hand cutting machine removed, then bonding surface processed into rough surface, in order to more firmly bonding good products, goods and products to keep small joints Nien (0.1 ~ 0.2 mm), the adhesive dried, machined on the special-shaped edge ( Cattle edge, ducks Qichen, etc.) need to open pots hole, drilling, cutting the use of different types of manual processing.
    Grinding: polished grinding is the first procedure, it must by modeling product polished surface processing, and maintain the shape and form of drawings anastomosis, if polishes not been in place, behind the polished spend more time failed to achieve the desired effect. Therefore, the product should be polished flat and smooth with no obvious hand and wave profiling. China Stone Network - www. stone-buy. com-operation Process
    Polish mill small hands: hands with the small mill products will be polished, gloss over 90 ° request, a polished mirror surface gloss, no feel, no wave profiling; Junction straightness remain in a straight line, the gloss reach consensus.
    The polished edge: Many products while only 20 ~ 30 mm, we should all wear the entire edge, but with small hand grinder polished gloss difficult to meet the requirement, and the slow processing speed. Therefore, the products will require milling fixed fixture fixed into a whole, using the mill to polish, so both improved gloss, and the formation of good, and no wave profile and feel.
 
    Product: The product-by-block inspection found that the timely replacement of substandard goods; Not grinding plate of the place, to conduct cosmetic treatment. If it is black products (Shanxi black), the adhesive after polish color to the entire white, the aesthetic impact of products available marker (black) here reveal, the marker will be the color seepage to products, so that it reached the color of the product line, reflects the overall aesthetic products. Other color products can also be used above methods. It must be stressed plastic color consistency of the product color, standing at the visual glue fill positions do not see better. China Stone Network - www. stone-buy. com-Stone knowledge
    Protective packaging: in accordance with the requirements of customers, products that do waterproofing treatment; By the standards of the export packaging, wooden boards are not allowed to bark, insect eyes, the product should be marked "not to pressure", "progressive" logo.